CLICK HERE FOR BLOGGER TEMPLATES AND MYSPACE LAYOUTS »

Monday, September 7, 2009

Pretty Lady Tut ~ FTU


"Pretty Lady"

This tutorial was written by myself on
9/5/09.
Any resemblence to any others is purely
coincidental.

I am assuming you have some knowledge
in PSP.

::MATERIALS NEEDED::
2 Tubes..a close up and a regular.
I am using the fantastic work of
Denis Rino and you can find the tubes
at www.mypsptubes.com

1 Scrapkit..Im using the AMAZING kit
by ziggyFan and you can find it at:
www.ziggyfanscraps.blogspot.com
It is part of the Total Disorder blog train
and it is FTU.

1 Mask of choice.

This tut is quick and easy..ENJOY!

Open Frame2 and resize by 80%.
Copy and paste as new image.
Image>Canvas Size 650/650.
We can resize later.

With magic wand click inside your frame.
Modify>Expand by 6.
Copy and paste paper 4 as a new layer.
Layers>Invert and hit delete on your
keyboard. Drag your paper layer
underneath your frame layer.
Do NOT deselect yet.

Copy and paste closeup tube as a new layer.
Once you have it positioned to your liking
hit delete on the keyboard once again.
Take the opacity to about 50% on this layer.
Drag this layer under your frame layer.
Make sure you have not deselected.

Click back on to your frame layer.
Copy and paste Ribbon2 as a new layer.
Resize by 80%.
Position on the bottom of the frame and
erase the end hanging off..see my tag for
reference.

Add a slight drop shadow of choice.

Click on the bottom layer in your layer pallete
and add paper5 as new layer.
Add mask of choice as I do not know where I got
the one I used so I cant provide it.
I resized my mask by 80%.

Using the same mask I reapplied with paper4 this time.
Resized by 80% and rotated to the left by 90.


Click back on your top layer.

Open flower2 and resize by 20%.
Copy and paste it on the frame in the left top
corner. Layers>duplicate>Image>mirror.

Add drop shadows of choice.

In a bold font type out "PRETTY LADY"
in colors of choice to match your tubes.
I used a gradient as a fill.
Duplicate them and paste them around your frame
as I have done (see tag for reference).
Add a drop shadow of choice.

Add your 2nd tube in a position of choice.
Add drop shadow.

Add your copyright info ect now.

In font of choice add your name on the top corner.
I used the font Brush Script.

Dont forget to crop your tag to the size of your choice.

If you have any questions please contact me at
polliwog707@aol.com

Thanks!
Cee



Sunday, September 6, 2009

IM BACK!

Gooood evenin ya'll!!
Wow its been a whole long while since Ive done anything here.
However that is about to change.
I have joined a CT and will be writing tutorials as often as possible.
Check em out when ya can!
Hugs
Cee

Saturday, June 20, 2009

New Note

Wow its been awhile since I have posted anything here.
Alot has been going on in my real life and online world as well.
I have left the stores I was selling in .. it was a fun ride.
If you are interested in any of my kits please email me!
I will post new stuffs here and there when I have time so please
check back when ya have the time.
Hugs
Cee

Tuesday, April 28, 2009

Got My Jeans On ~ Tut


This tut was done using my "Old Blue Jeans"
kit..thanks sooOOoo much Lori for working
with my kit!

Find the tut on Loris blog
HERE



Friday, April 17, 2009

~Old Jeans


This is my newest kit.
"Old Jeans"
I had alot of fun making this kit!
You can find it at
www.paradise4scrappers.com
and
www.scrapheavenboutique.com


Fairy Magic Tag/Tut


This is a tag/tut done using my Bloomin kit.
You can find the tut HERE
Tut written by DesignsbyLynne. GREAT JOB!

You can find the kit HERE
or HERE or HERE



Wednesday, April 8, 2009

~Bloomin

"Bloomin"
If interested in this kit please email me using the link below.
BLOOMIN KIT

Sunday, March 22, 2009

~Giddie Up


Giddie Up
If interested in this kit please email me..
HERE

Tags done with this kit.
Done by the awesome Natasha

Tuesday, March 17, 2009

Bringing Sexii Back Tut Results



These tags were done by Tina and Debi using my
"Bringing Sexii Back" tutorial.
You can find the tut HERE.

~Spring Awakening Tag


This tag was done by the fabulous Natasha using
my new kit Dezired Sweetness.
You can find the tut HERE.
The kit HERE.

There is also a pic of the kit below this post.

Monday, March 16, 2009

~Dezired Sweetness


This kit was made with a good friend in mind and she
was a great help with it!
Thanks honey!!
If interested in this kit please email me HERE

Thursday, March 12, 2009

~Rockin Skullz

ROCKIN SKULLZ
~Commercial Use~
Add a little tude to your pages/tags!
If interested please email me at polliwog707@aol.com

Friday, March 6, 2009

~Spring Dream


~Spring Dream~
This tutorial was written by
SassyCee on 3-6-09.

I used the fantabulous collabaration
kit only available at www.paradise4scrappers.com

Please note that there are many folders
in this kit so all elements are in the different
labeled folders. I put the beginning initials or
names in " " marks that matched the folders
so you will know which ones to go to.


~SUPPLIES NEEDED~
1 tube of choice. I use the awesome work of
Zindy Nielsen. You can get her work at
http://zindy-zone.dk

Kit or supplies of choice~
I used the fantabulous collabaration
kit only available at www.paradise4scrappers.com

Mask of choice

:::OKAY LETS GET GOING:::


File/New 700x700
Floodfilled white.

Open and paste "AS" Frame 2
and paste as a new layer.

Click inside frame with your magic wand
and modify/expand 15.

Add new layer and paste paper of choice
into selection. I chose "BBD"Paper6.
Move this paper layer under your frame layer.

Click back on your frame layer and it
should still have the marching ants on it.
Paste tube of choice as a new layer.
Selections invert and hit delete on your
keyboard.

Deselect.

Once again click back on your frame layer.
Paste "AS" Ribbon Bow as a new layer.

Click back on your frame and hit duplicate.
Move this duplicated layer above your
frame layer. Erase any of the bow hanging out.

Open "SWT" tag3 and resize it by 70%.
Paste it as a new layer and place it to the
right top corner of the frame.

Open "CKD" button1 and resize it by 10%
and paste as a new layer on the tag.
See my tag for reference.

Now open "missfoxys" flowerpainting_1 and
resize it by 15% and paste it as a new layer.
Image mirror, move it to the left side of
the frame and rotate left 47.

Open "pimpd" dream-wa and resize it by 25%
and rotate it right 39. Place it on the green
part of the tag..see my tag above.

Open "pimpd" jewel butterfly and resize this by
25% and place it near the flowers on the left
hand side.

Click on the flower layer and duplicate/mirror.
Resize the duplicated layer 70% and move it
to the bottom right corner of the frame.

Open "SouthernScrapz" ele1, resize it by 40%
and mirror it. Place it on the top left of the
frame and I rotated mine by 5.

Click on your bottom layer and add paper of
choice as a new layer. I used "SouthernScrapz"
paper15.

Apply mask of choice.

Merge all flatten and add your watermark and
copyright info.

Add any name you want as well.

Thank you for trying this tutorial
if you have any questions you can email me
at sassyceedesignz@aol.com

THANKS!



Thursday, March 5, 2009

~Shamrocking Day

~Shamrocking Day~
This tutorial was written by
SassyCee Designz on 3-5-09

~Supplies Needed:
2 tubes of choice - a closeup
and a regular one. I chose to use
tubes by Ismael Rac and you can find
them at www.mypsptubes.com

Scrapkit or supplies of choice.
The kit I used is by the fabulous
HonoredScraps and you can find her
amazing works here:
http://treasuredscraps.com/store

::Okay Lets get the tut on the road::

I do not instruct you to use dropshadows
as I almost ALWAYS like something different
then what the tut writer has used in other
tuts lol. So please remember to use
dropshadows of choice along the way.

File/New/600x600
Floodfill White.

Open frame1 and paste as new
layer/resized by 75%.

Click inside frame with magic
wand. Make sure to get both the top
and the bottom parts.

Paste paper4 or paper of choice as
a new layer. Selections/invert and
hit delete on your keyboard.

Move the paper layer under the frame
layer.

Do not deselect.

Paste your closeup tube as a new layer
and position in the frame to your liking.
Lower the opacity on this layer to about
50%.

Deselect.

Resize flower5 by 20%. Place it on the
button on the ribbon.

Adjust/Sharpen/Sharpen.

Add paddylillies and forgetmenots
both resized by 70% as new layers
and place to the right of the frame.


Add 2nd tube of choice and place on top
of the paddylillies and forgetmenots.

I then opened clover1 and resized it by
20%, placed it under my 2nd tube layer
and duplicated it a few times to make a
little patch of them under her feet.

Now add a saying of choice..I chose
"Have a Shamrocking Day!"

Once finished please remember to add any
copyright/watermark info needed.

If you have any questions please email
me at sassyceedesignz@gmail.com

Thanks for trying my tutorial!






Tuesday, March 3, 2009

Spring~Ah~Ling


I had so much fun with this kit!
I hope you will to!
33 elements, 10 papers and 6 frames.
If interested in this kit please email me HERE

Sunday, March 1, 2009

~Dreams


~*~DREAMS~*~
This tutorial was written by
SassyCee on 3-1-09

~Supplies Needed~
1 Tube of choice.
1 Mask of choice.
Scrapkit of supplies of choice.
I used the gorgeous scrapkit called
Pieces Of a Dream by Vassias Designs.
You can find it HERE.

My tube of choice is one by Marco Guaglione
and you can find it HERE.

:::LETS GET STARTED:::

File/New 500x500
Floodfill this white.

Open frame2 and paste as a
new layer. Resize it by 75%

Click on the bottom white layer
and paste paper23 as a new layer.
Apply mask of choice.

Click back on the frame layer.

Paste tube of choice and erase
anything you dont want hanging over
the frame.

Copy and paste doodleflowers1 as
a new layer. Resize by 70% and
move to the left of the frame.

Using your pick tool play with the
doodleflower some until its not
taking over your tube layer.

Open Bow7 and resize it by 70%.
Paste it as a new layer and move it down
towards the bottom of the doodleflower.

Open Believe and paste it on top of
the bow layer. Move it to the middle
of the frame on the bottom.

Open Glitterbutterfly2 and paste it as a
new layer. Resize it by 40%. Image/mirror.
Move it down so it looks like it is hanging
off of the E in Believe.

Open Staple2 and resize it by 50%.
Place it on the right side of the frame.
Duplicate it and move it to the left side.

I then opened crystal1 and resized it by
30% and placed one on top of each staple.

Please give dropshadows and sharpen your
images that you have resized before you save
your work

Add your copyright info and watermark ect.

Thanks for trying my tutorial.
If you have any questions PLEASE email me
at sassyceedesignz@aol.com

Friday, February 27, 2009

Hangin in the Daisies

~Hangin in The Daisies~
This tutorial was written by
SassyCee on 2-27-09.

SUPPLIES NEEDED:
All supplies in this tutorial are from
the spectacular scrapkit by Swheat Creations.
You can find it at paradise4scrappers.com
or by clicking HERE.

Please add drop shadows of choice along the
way as I do not instruct you to do so.

~LETS GET THE PARTY STARTED NOW~

File New 600x600

Open frame2 and paste as new layer.
Resize if you would like, I did not.

Take magic wand and click inside the
frame. Selections/modify expand 2.
Copy and paste PinkBkg6 or paper
of choice as new layer.

Make sure you are on your paper layer
and selections/invert, hit delete
on your keyboard.
Move this layer under your frame layer.

Click back on your frame layer and once
again with your magic want click inside.
Modify/expand 2.

Paste Flowerpatch as a new layer.
Selections invert and hit delete on your
keyboard. Move this under your frame layer.

Open Bear3 or tube of choice and paste
as a new layer on top of the flowerpatch.
resize it by 50%.
Move it down towards the bottom of the
Flowerpatch.

Click on your frame layer again and repeat
the magic wand/expand steps from above.

Paste your flowerpatch layer again and move it
so you can see the bears through. See my tag for
reference.

Selections/invert and hit delete on your keyboard.

I then erased any part of the bears I could see
through the eyelets on the frame.

Open butterfly of choice and resize it by 20%
or smaller if you wish and paste it as a new layer.

Image free rotate/15/right.
Layers duplicate and mirror.

Move it to place of your choice.

Open leaves and place as a new layer UNDER your
paper layer. Move them to your liking. I erased
anything showing through the eyelets again.

Open Pearlbow4 or bow of choice and paste it
as a new layer you should be on the top layer now.
Resize it 60% and place it on the top left of the
frame.

Open ribbon3 and paste it as a new layer on the bottom
of the frame. resize it 60%.

Open daisy4 and resize it by 50% paste it as a new
layer on top of ribbon3 at the bottom of the frame.
Duplicate it and mirror. Duplicate it once more
and move this to the middle.

Open daisy3 and resize it by 50% as well.
Paste it as a new layer between 2 of the daisys.
Duplicate it and mirror.

Please add any watermarks and names now.

Thanks for trying my tutorial!
If you have any questions you can email me at
mzlilbrat2u@gmail.com








Tuesday, February 24, 2009

Hoppitty Easter

Here comes Peter Cottontail!
I love holidays sooo I had alot of
fun making this kit.
TAGGER SIZE~PERSONAL USE ONLY
If interested in this kit please email me at polliwog707@aol.com

CU Easter Eggs

Commercial Use Easter Eggs
If interested in these please email me at polliwog707@aol.com

Sunday, February 22, 2009

NEW KIT~Red n Black Attack


If interested in this kit please email me HERE

Thursday, February 12, 2009

~Treasured Love


~Treasured Love~
This tutorial was writting on
2-12-09 by Sassy Cee.
Please do not copy.

~Supplies Needed~
3 Tubes of choice or you can
grab the ones Im using by
Steve Baier at www.upyourart.com

Kit of choice or get the amazing
kit Im using by Honored scraps at
http://treasuredscraps.com/store

Mask of choice. I cant give mine
out.

~*~ALRIGHT LETS GET STARTED~

Open new image 600 x 600 and
flood fill it white.

Open frame1 and resize 60%.
Copy and paste it as a new layer.

With your magic wand click inside
one of the frames and modify/expand 2.

Paste a paper of choice as a new
layer and then invert and hit delete
on your keyboard.
Do NOT deselect.

Paste one of your tubes as a new layer.
Position to your liking inside the
frame with the marching ants.
Once happy with where its placed
hit delete on your keyboard. Move this
layer and the paper layer under
your frame layer.

Repeat this process with the next 2
frames.

Click on your bottom white layer and
close it.

Merge visible the paper/frame and tubes
layers.

Open your bottom layer back up.

Give your frame layer a drop shadow
of choice.

Copy and paste heartframe1 as a new
layer and resize it by 70%.

Click inside the heart frame with your
magic wand and paste paper of choice.
Invert and hit delete on your keyboard.
Move the paper layer under the frame layer.

Give your frame layer a dropshadow of choice.

Click back on your other frame layer and duplicate
it. Move the duplicated layer under the original.

Adjust blur/gausian blur 20.

Paste Love ribbon of choice as new layer.
Resize by 40% and move to the middle of the
ribbon on the frame. See my tag for reference.

Copy and paste flower of choice as a new
layer and resize it by about 20 percent or
to your liking. Paste it in the middle of the
love ribbon.
Give it a nice dropshadow.

Copy and paste doodle of choice.
I always leave this up to the tagger.
Play with them a little and find something
that works for you.

Open beads2 and resize by 50% and paste
as a new layer on the top of your frame.
See my tag.

Click on your bottom layer and add paper
and mask of choice.

Dont forget your copyright info and watermarks!

If you have any questions please email me
at mzlilbrat2u@gmail.com

Thanks!



Wednesday, February 11, 2009

~Party Bag


~Party Time~
This tutorial was written on
2-11-09 by Cee.

~Supplies Needed~
~Tube of choice or you can go to
http://www.mypsptubes.com/ and buy the tube Im
using by Elias Chatzsoudis.

~Scrapkit of choice. Im using one done
by me its called Party Bag
and you can find it on my blog
at http://www.sassycee.blogspot.com/

~OKAY LETS GET MOVING~

File/New 600x600 flood fill white.

Open PBFrame2 and paste as new layer.

Click on white layer and paste paper
of choice. I chose PBPaper5.

Apply mask of choice. I used wsl_mask187.

Click inside the frame with your magic
wand and paste your tube of choice.

Selections/invert and hit delete on
your keyboard.

Move this layer under your frame.
Give a slight dropshadow.

Open PBBowWrap and resize 70%.
I then duplicated it and moved the original
below the frame. Click back on the duplicated
bow and erase the parts covering the flowers.

I duplicated the bottow bow and moved it
over a bit to look thicker.

I then added a couple flowers of choice
resized by 70 and added a drop shadow.
Placed around the frame where you like
them.

Open PBWordart and paste as a new layer.
I added noise to it with settings set at:
Uniform, noise 80%.
Give it a dropshadow of choice.

Place name and voila you are finished!

Thanks for trying my tutorial.
You can always reach me at
mzlilbrat2u@gmail.com

~My Heart 4 You~


~My Heart 4 You~
This tutorial was written by
SassyCee on 2/11/09. Any resemblence
to any other tut is purely by
coincidense only.

~SUPPLIES YOU WILL NEED~
Grab tube of choice. Mine is by the
incredible Ed Mironiuk and you can
find his work at www.cilm.com.

Scrapkit or supplies of choice.
My kit is a FTU kit and you can
find it HERE

~Okay grab a drink of choice and
lets get this party started~

Open frame1
Click inside the frame with your magic
wand and expand by 5.

Copy and paste paper of choice as
a new layer. I used paper 7.

Invert and hit delete on your keyboard.
Do not deselect yet.

Move the paper under your frame layer.

Ad your tube of choice and place within
the frame where you like it best and
then hit deselect.

Move this layer under your frame.

Open flower10 and resize by 70%.
Paste as new layer near the bottom left
of the heart. Duplicate the flower
and mirror.

Open wrap1 and resize it by 70%.
Place it under the flowers and use your
eraser to erase anything showing on the
ends.

Open deco2 and paste as new layer near
the top of the heart. I used my eraser
to get rid of anything that was on any
other part *your letters, tubes ect.

Click on the bottom layer and ad bling1
as a new layer. Duplicate them and move
them around to your liking.

Add your watermark, and copyright info
if needed and add names.

Enjoy!
Id love to see your results.
You can send them to mzlilbrat2u@gmail.com
if you would like.

Have a great day!


Tuesday, February 10, 2009

~Valentine Wordart Freebie



~Party Bag


Not all elements are show,
This kit includes over 30 elements
and 8 papers.

Saturday, February 7, 2009

~Plaid Blue FTU


This is just something I did while I should of probably
been doing more important things lol!
What the heck...it was fun :)
You can get it here
Please leave a comment if you dl it!
Thanks

Friday, February 6, 2009

~Hula Hut


~HulaHut~
This tutorial was written by me,
SassyCee on 2-6-09.
Any resemblance to any other tutorial
is purely coincidental.

~SUPPLIES NEEDED~
~Mask of choice or the one I used.
You can get it here montispixelplayground

~Scrapkit of choice. Im using the fantastic
work of Alane at Inspired to dream scraps
~Okay now that you have your supplies,
go grab a soda and a couple snacks and
lets get the party started!~


Alright if you have done my tuts
before you know the first step lol..
new image 600x600. Floodfill this white.

Paste one of the bamboo frames as a new
layer and resize it by 30%.

With your magic wand, close your eyes
and say bippity boppity boo and push the
mouse button and watch the lil magic ants
dance around inside the frame. LoL
Okay, okay click inside the frame with
your magic wand lol.
Modify/expand by 2.

Paste one of these beautiful print papers
or a graphic of choice into selection and
deselect. Add drop shadow of choice.

Open Lei2 and lets resize it unless you
want to print it out to wear hehe.
Resize it by 25% and move it to the top
left of the frame. Use your pick tool to
rotate it and then erase a small part
so it looks like it is hanging over the
frame.

Open the ukulele and resize it by 25%
as well. Again use your pick tool and
rotate it to the right just a bit and add
a dropshadow.

Open flowerset and resize by 10%.
Paste the bunch as a new layer on the
bottom of your frame and duplicate twice
so you have 3 arrange them as you want.
Merge them visible and add a dropshadow.

Open the hut and resize by 3% and yes I said
3% lol. Paste it as a new layer on the
sand in the paper. You will need to sharpen
this and add a dropshadow.

Open a lil hula girl of choice and resize her
by 3% again. Paste her near the hut and
again sharpen and dropshadow.

Open palmtree01 and resize 30%. Paste behind
your frame layer. Position to the left. Add
a dropshadow.

Nowww for the finale lets click on the bottom
white layer and add a paper of color of choice.
Then we will add a mask of choice. Or the one
I used which is montis blinds mask.

Please add all your copyright info and your
watermark now.

Add name of choice and enjoy.

If you have any questions you can reach me at
mzlilbrat2u@gmail.com

THANKS!

Thursday, February 5, 2009

~Bringing Sexii Back


~Bringing Sexii Back~
This tutorial was written on
2-5-09 by SassyCee

If it looks familiar in anyway it
is purely coincidental.

~Supplies you will need:
2 Tubes of choice mine are done by
Susan Heidi and you can find her work
at www.mypsptubes.com

Scrapkit of choice or the one I am using.
It is called Pink and its a freebie by
Beas you can find it at
http://beacreations.blogspot.com/

Mask of choice ~ dont have a clue where
I got mine so I cant supply it.

~*~READY OR NOT HERE WE GO~*~

(Please remember to add dropshadows
to your liking throughout the tut.)

File/new 550x550 floodfill white.

Open frame3 and paste as new layer.

With magic wand click inside the frame,
modify/expand 2.

Paste paper of choice resized by 70%
as a new layer. Selections invert and
hit delete on your keyboard.

Do not deselect.

Add close up tube or tube of choice as
a new layer and position to the left side
of the frame. Hit delete on the keyboard
one more time. Deselect.

Make sure these layers are under the frame
layer.

Make sure you are on the top layer.

Paste frame2 as a new layer and position
to the right side of the first frame.

With your magic wand click inside both
of these frames.

Modify/expand 2.

Add a different paper of choice.
Selections invert and hit delete on the
keyboard once more. Deselect. Move these
papers under the frame.

Back on the frame2 layer click inside one
of them with the magic wand and paste 2nd
tube as a new layer. Position it to show
what you want in the frame and modify/invert
and hit delete on the keyboard.

Follow the above step for the other frame.

Close off all layers accept the frame 2,
the papers and tubes in frame tube and merge
those visible.

Open the other layers back up.

Open bow5 and paste as a new layer.
Resized by 80%. Move it between the two
frames.

Using your pick tool resize the bow to fit
to your liking.

Paste deco3 as a new layer resized by 30%.
Move it in the middle of the bow.

Hide your bottom layer and merge the rest
visible. Open your bottom layer again.

Open frame3 again and paste as new layer on
top of your bottom layer.

Click inside the frame with your magic wand.
Modify/expand 2.
New raster layer. Floodfill with color of
choice.

Move this layer under your frame and merge
these 2 layers together.

Image free rotate/right by 20.00.

Open butterfly of choice and resize by 50%.
Paste as new layer and move to the upper left
of the frame.

Click back on your bottom white layer again.

Add paper of choice and apply mask of choice.

Choose one of the doddles and apply to your
tag to your liking.

Now add your copyright and watermark info.

Add name and enjoy :)

You can reach me at
mzlilbrat2u@gmail.com


Wednesday, February 4, 2009

~Innocent Rose


~Innocent Rose~
Written 2-4-09
By Sassy Cee
This tut was done in PSPX but Im sure
you can do it in other versions.

~Supplies Needed~
~1 Tube of choice. Mine cannot by shared
it is done by Irene Shpak and you can
find her brilliant work at www.mypsptubes.com.

~Scrapkit of choice or mine which is the
mykuuipo add on by Alane and you can find
it at Inspiredtodreamscraps

~I used mask wsl_181 and you can get it and
many more here weescotslass

~*~LETS GET STARTED~*~
Open new image 600x600 and we can resize later, I like
to have room to work in.

Copy and paste laceframe01 and resize 20%
With your magic wand click inside the frame
paste paper of choice as a new layer, selctions
invert and hit delete on your keyboard.
Do not deselect.
Paste in your tube of choice and position it
to your liking.
Hit delete on your keyboard one more time and
deselect.

Make sure your tube is on top of the paper layer.
Give your tube a slight dropshadow of choice.

Click back on the top layer.

Open Ribbonbow01, resize to 15% and paste as new
layer. Image, mirror and move towards the bottom
of the frame.
With your freehand tool get rid of the extra on the
end by selecting the portion you dont want and hitting
delete on the keyboard.

Open Rose02 and resize 15%.
Paste as a new layer and move to the left side of the bow.
See my tag for reference. Layers, duplicate and mirror.
Move this next to the first one.

Copy and paste swirlie01 as a new layer resized by 30%.
I duplicated these for a total of 3 and arranged them
between my roses.

Copy and paste heart03. Resize it to 15%. Place it in the
lower middle of the roses. Adjust>sharpness>sharpen.

Click on your white bottom layer, add new layer. Add color
or paper of choice and add a mask of choice as well.
Ive used wsl mask 181 and resized it by 90%.


Id love to see your results! You can share them
with me at mzlilbrat2u@gmail.com


Tuesday, February 3, 2009

~Butterfly Love



~BUTTERFLY LOVE~

Supplies Needed:

~Mask of Choice

~Tube of Choice. Im using the fantabulous work of

Zindy and you can find her work at http://zindy-zone.dk.


~Scrapkit of choice. The one I am using is by Alane and
is called mykuuipo.
You can find her awesome stuffs here
INSPIREDTODREAMSCRAPS

~Font of Choice

~Eyecandy4.0 Gradient Glow (optional)

~LETS GET STARTED~

File New 600x600 floodfill white.

Paste frame01 as new layer and resize by 20%.

With your magic wand click inside your frame.
Modify and expand by 3.

Open paper of choice and resize at by 20% and
paste as a new layer on top of your frame layer.
Selections invert and hit delete on your keyboard.
Drag this layer under your frame layer but do
not deselect.

Add your tube of choice now and once placed where
you want it hit delete on your keyboard now and get
rid of anything showing outside the frame.
Deselect.

Open raindrops03 and resize by 20% place between your
and paper layers. Add dropshadow of choice.

Close off your white layer and merge visible.

Make sure you are on the top layer now and paste
doodle01 as a new layer, resize by 30% and move
to the right side of the frame.
A big drop shadow works good on this piece.

Choose a doodle of your choice and resize it
to your liking. Paste as a new layer and
move it under your frame..you can add a couple
different ones if you choose so.

Make sure you are once again on the top layer and
paste one of the LOVE words as a new layer. I resized
mine by 40% and added a gradient glow and a drop shadow
to make it stand out better.

Click on the bottom white layer and add paper of choice.
I chose paper01. Now add a mask of choice.

Please leave me an email if you have any questions
mzlilbrat2u@gmail.com



This kit is just something I was messing with
and decided to share.
You can get it here





Monday, February 2, 2009

~Sweetheart~


~Sweetheart~

Supplies Needed:
~DSB Flux ~ Linear Transmission

~Tube of choice mine is done by Vinegar and I cannot provide it.
You can find her work at www.mypsptubes.com

~Scrap kit of choice or you can use the one I have it is FTU and you
can find it at http://rockinsruckus.blogspot.com/ it is part of
the awesome valentine blog train and is called deartomyheart.

~Mask wsl 94 and you can get it here http://www.weescotslass.co.uk/

~LETS GET STARTED~

Open new image 600x600 we can resize later.
Flood fill white.

Copy and paste frame 1 as new layer. Resize by 80%.
Click on white layer and copy and paste paper 10
as a new layer. Apply your mask, layers delete and merge group.

Add your tube between the frame layer and the mask layer and with your
selection tool get rid of anything outside the frame.

Duplicate your tube layer and on your bottom
tube layer go to plugins dsb flux/linear transmission
with these settings:
Slice size 5
offset 3
Blend 50
Horizontal checked

Give your top tube layer a drop shadow of choice.

Copy and paste label of choice and resize by 40% and add drop
shadow of choice.

Open 2 hearts of choice. Copy and paste first one and resize
by 15% add it to the right side of the tag near the top of the
frame. Rotate by 10 to the left. Layers duplicate and rotate
20 to the right and move towards the bottom of the frame.
On the 2nd heart you opened paste as new layer and resize by 20%.
See my tag for reference.

I duplicated each little heart after they were where I wanted them
and again added the linear transmission with the same settings
as before.

You can add embellishments of your choice of course.
I added a little bow to the sucker.

Add your copyright and watermark info now and save.
I hope you enjoyed this tutorial and if you have any questions
you can reach me at polliwog707@aol.com anytime.
Thanks
Cee


~I Heart You~


~I Heart You~

Supplies Needed:
Tube of choice, I used the wonderful work of Robin McQuay she is
a pay to use artist so I cannot provide it. You can find her at
www.upyourart.com

Scrapkit of choice or you can purchase the one I used at
www.treasuredscraps.com it is called polka-love by Tracey aka untamedangel

This tutorial was written on 2-2-09 by Sassy Cee
Please do not duplicate or claim as your own.

~LETS GET STARTED~

New image 600x600 floodfill white.

Copy and paste frame05 as new layer. Resize by 80%.

With magic wand click inside one of the frames, modify expand by 2
and add a paper of choice. selections invert and hit delete on your
keyboard. Do not deselect. Add a tube of your choice and once you have
it where you want it in that box hit delete on the keyboard again.
Deselect and do the same with the other 2 boxes.

Close off your bottom white layer and merge visible.
Open the white layer up again.

Open element 12 and resize to your liking. Paste near bottom of tag.

Open flower element 29 resize to your liking as well and paste in the middle
of the ribbon.

Open a bow of choice (I used element03) and resize by 30%. Paste it on the end
of your tag, duplicate and then mirror. Add drop shadow of choice.

Click on bottom layer and add paper of choice as new layer.
Add mask of choice. Layers delete, click yes on the box that pops up.
Then merge group.

Copy and paste element 32 and resize 70%. Place on the left side of the frame
(make sure you are under the frame layer and on top of the mask layer).
Duplicate and mirror. Add drop shadow of choice.

Add text of choice. I chose I Heart You using the font Mr Lackboughs and I
cannot provide that.

Add your copyright info and watermarks now.


Thanks for trying my tutorial.
Sassy Cee





Sunday, February 1, 2009

~Be Mine~



~Be Mine~
This tutorial is one I have created and any similarities
are purely coincidental.
If you have any problems please contact me at Polliwog707@aol.com
Id also love to see any results of the tut!

Supplies Needed:
Tube of choice. Im using one by Elias Chatzoudis and I cannot provide it.
You can find his work at www.mypsptubes.com
Scrapkit called Be_Mine can be found here http://staceysdesigns.blogspot.com/
Mask of choice.

Filter used Eyecandy 4 gradient glow.
(I used this on my name text) so its an option.

~~OKAY LETS GET STARTED~~

New image 600 x 600 floodfill white.

Copy and paste PinkStitchedHeart as new layer.

With magic wand click inside your heart, modify contract by 10.

Copy and paste paper2 as new layer. Selections invert then hit delete
on your keyboard. Drop shadow of choice.

Open Pinkbemine resize 40% and copy and paste as new layer.
Gradient glow black.

Open PinkFlower and resize 40% Copy and past as new layer.
Duplicate, mirror, duplicate and move to the middle *see my tag
for location*, duplicate once more and resize by 40% then move to
the left or right and duplicate one last time and mirror. Drop shadow
of choice as always. Close off all layers except the flowers and merge
visible. Open the other layers up again.

Add tube of choice and move under the flowers.

Open PinkHeartRibbon and resize by 70%. Copy and paste as new layer.
Rotate by 25 and with eraser tool get rid of as much as you do not want on there.
See my tag as a reference.

Click on bottom white layer and add paper2. Apply mask of choice.

Add your copyright info and watermarks now.

Resize and save.

Thursday, January 29, 2009

Twilight Add On

Made a couple frames to add on to the
Twilight set.
Get them HERE

Heart You






~Heart You~
Something for Valentines Day.
Not all elements are shown here.
Please leave comments if you download.
You can get this scrap here..HEART YOU





Sunday, January 25, 2009



This is my tribute to the amazing movie TWILIGHT! I am a fanatic lol!
There are a few things not shown..hope ya all enjoy it..again any comments/opinions are very
much appreciated!

You can download it here: BnExCee